Dell PowerEdge T300 - Manual (Page 85)

Installing System Components
85
6 Slide the drive release latch towards the base of the system to release the
shoulder screw, then slide the diskette drive out of the drive bay. See .
NOTE:
If you are permanently removing the diskette drive, replace the
3.5-inch EMI filler (see "Installing an EMI Filler" on page 69) and the 3.5-inch
insert on the front bezel (see "Installing a Front Bezel Insert" on page 66).
Figure 3-15. Removing and Installing a Diskette Drive
1 diskette drive 2 shoulder screw
3 drive release latch
1
2
3
book.book Page 85 Sunday, June 21, 2009 10:04 AM