Dell PowerEdge T300 - Manual (Page 81)

Installing System Components
81
2 Remove the system cover (see "Removing the System Cover" on page 66).
3 Disconnect the data cable and the power cable from the hard drive in the
drive bay.
4 Press in on the blue tabs on each side of the hard drive bracket and slide
the drive up and out of the bay.
Figure 3-13. Removing and Installing a Cabled Hard Drive
NOTE:
If you are not replacing the hard drive, remove the drive from the drive
bracket (see Figure 3-14) and insert the empty bracket back into the drive bay.
1 hard drive 2 data cable
3 power cable 4 blue tabs (2)
3
4
2
1
book.book Page 81 Sunday, June 21, 2009 10:04 AM