Troubleshooting an optical drive – Dell PowerEdge T300 User Manual

Page 151

Advertising
background image

Troubleshooting Your System

151

21 Remove the processor airflow shroud (see "Removing the Processor Airflow

Shroud" on page 70).

22 Open the system (see "System Cover" on page 66).
23 Reinstall one of the expansion cards you removed in step 15 (see

"Installing an Expansion Card" on page 95).

24 Replace the processor airflow shroud (see "Installing the Processor Airflow

Shroud" on page 72).

25 Close the system (see "Installing the System Cover" on page 67).
26 Reconnect the system to the electrical outlet, and turn on the system and

attached peripherals.

27 Run the appropriate online diagnostic test to see whether the diskette

drive works correctly.

28 Repeat step 20 through step 27 until all expansion cards are reinstalled or

one of the expansion cards causes the tests to fail.

If the problem is not resolved, see "Getting Help" on page 175.

Troubleshooting an Optical Drive

Problem

System cannot read data from a CD or DVD in an optical drive.

Optical drive indicator does not blink during boot.

Action

CAUTION:

Many repairs may only be done by a certified service technician. You

should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.

1 Try using a different CD or DVD that you know works properly.
2 Enter the System Setup program and ensure that the optical drive

controller is enabled (see "Entering the System Setup Program" on
page 41).

book.book Page 151 Sunday, June 21, 2009 10:04 AM

Advertising