Dell PowerEdge T605 User Manual
Page 102
Advertising
102
Installing System Components
5 Remove the expansion card shroud. See "Removing the Expansion Card
6 If another drive is installed, remove it (see "Removing an Optical or Tape
Drive" on page 97) and remove the three shoulder screws to attach to the
new drive (see Figure 3-21).
7 If the drive bay is empty, remove the insert on the front drive bezel. See
"Removing an Insert on the Front Drive Bezel" on page 67.
8 Remove the three shoulder screws from the insert, and attach one of them
to the top row of holes and two to the bottom row of holes on the drive.
See Figure 3-21.
Figure 3-21.
Installing Optical or Tape Drive Shoulder Screws
9 Gently slide the drive into place until you hear a click or feel the drive
securely installed.
1
screws (3)
1
Advertising