Installing a processor – Dell PowerEdge T605 User Manual
Page 137
Advertising
Installing System Components
137
Figure 3-35.
Installing and Removing a Processor
11 Lift the processor out of the socket and leave the release lever up so that
the socket is ready for the new processor.
NOTICE:
Be careful not to bend any of the pins on the ZIF socket when removing
the processor. Bending the pins can permanently damage the system board.
Installing a Processor
1 Unpack the new processor.
2 If you are installing a second processor for the first time, remove and
discard the protective shield on top of the ZIF socket. See Figure 3-35.
3 Align the processor with the socket keys on the ZIF socket. See
1
notch in processor (2)
2
processor
3
ZIF socket shield
4
socket-release lever
5
ZIF socket
6
processor shield
7
socket key (2)
1
2
3
4
5
6
7
Advertising