Installing a redundant power supply – Dell PowerEdge T605 User Manual
Page 77
Advertising
Installing System Components
77
Figure 3-7.
Removing and Installing a Redundant Power Supply
Installing a Redundant Power Supply
1 With the power-supply handle in the extended position, slide the new
power supply into the chassis. See Figure 3-7.
2 Rotate the handle down until it is completely flush with the power-supply
faceplate and the locking tab engages. See Figure 3-7.
1
locking tab
2
power-supply handle
3
cable retention bracket
1
2
3
Advertising