Installing the sas/sata backplane – Dell PowerEdge T605 User Manual
Page 151
Advertising
Installing System Components
151
Figure 3-42.
Removing and Installing the SAS/SATA Backplane
Installing the SAS/SATA Backplane
1 Position the SAS/SATA backplane so that the securing tabs on the chassis
are fully inserted into the securing slots on the backplane. See Figure 3-42.
2 Slide the backplane to the right until the release pin snaps into place.
1
backplane release pin
2
securing tabs (4)
3
securing slots (4)
4
SAS connector
5
backplane connector
6
SAS/SATA backplane
7
SAS cable connector
8
power cable
1
8
4
7
5
3
2
6
Advertising