Dell PowerEdge T605 User Manual
Page 158
Advertising
158
Installing System Components
•
Diskette data cable to the FLOPPY connector
•
PATA data cable to IDE connector
•
Expansion card fan cable to the FAN1 connector
•
System fan cable to the FAN2 connector
•
SAS LED cable to the PERC_LED connector
•
SAS/SATA backplane cable to BP_12C connector
•
Intrusion switch cable to the INTRUSION connector
12 Close the system. See "Closing the System" on page 70.
13 Place the system upright and on its feet on a flat, stable surface.
14 Install the front-drive bezel. See "Installing the Front Drive Bezel" on
15 Reattach any peripherals, then connect the system to the electrical outlet.
16 Turn on the system and attached peripherals.
Advertising