Dell 2130cn Color Laser Printer - Manual (Page 158)

NetWare Setup Page
Purpose:
To verify the current settings of Netware. In this page, you can only verify the settings of items. If you want to change the settings, go to the pages in the
Print Server Settings tab.
Values:
E-Mail Alert Setup Page
Purpose:
To verify the current settings of SMTP/POP (Simple Mail Transfer Protocol/Post Office Protocol) used for the e-mail feature and E-Mail Alerts feature. In this
page, you can only verify the settings of items. If you want to change the settings, go to the pages in the Print Server Settings tab.
Values:
Remote peers IPv4 address Displays the IP address to connect to.
Remote peers IPv6 address Displays the IP address to connect to.
Non IPsec communication
policy
Displays the status of the Non IPsec communication policy feature.
802.1x *1*4
Enable IEEE 802.1x Displays the status of IEEE 802.1x.
Authentication Method Displays the setting of authentication method for IEEE 802.1x.
IP Filter
(IPv4)*
5
Access List Displays the list of IP addresses that are permitted or denied access to the printer.
* 1 This settings are not displayed when the optional wireless printer adapter is installed.
* 2 An optional wireless printer adapter is required to display the item.
* 3 This item is only available when using Ipv6 dual mode.
* 4 An optional network protocol adapter is required to display the item.
* 5 This item is only available for LPD or Port9100.
NetWare
Port Status Displays the port status.
Device Name Displays the printer name.
Active Mode Displays the current mode for Active Mode.
Tree Name Displays the tree name.
Context Name Displays the context name of the Print Server Object.
Polling Interval Displays the time interval.
Status Information Displays messages according to the conditions of the printer.
SLP Active Discovery Displays whether active discovery is enabled.
NOTE: An optional network protocol adapter is required to display the NetWare Setup Page.
E-Mail Server
Settings
Port Status Displays the port status.
Primary SMTP Gateway Displays the primary SMTP (Simple Mail Transfer Protocol) gateway.
SMTP Port Number Displays the SMTP port number.
E-Mail Send
Authentication
Displays the authentication method for outgoing e-mail.
POP3 Server Address Displays the POP3 (Post Office Protocol 3) server address.
POP3 Port Number Displays the POP3 port number.
Reply Address Displays the IP address of servers connected with SMTP protocol when data is incoming.
SMTP Server Connection Displays the status of the SMTP server connection.
E-Mail Alert Settings
E-Mail List 1 Displays the acceptable e-mail addresses for the E-Mail Alert feature specified in E-mail List 1.
Select Alerts for List 1
Supplies Alerts Displays the status, and whether to receive an E-Mail Alert, for consumables.
Paper Handling
Alerts Displays the status, and whether to receive an E-Mail Alert, for paper
handling.
Service Call Displays the status, and whether to receive an E-Mail Alert, for Service Calls.
E-Mail List 2 Displays the acceptable e-mail addresses for the E-Mail Alert feature specified in E-mail List 2.
Select Alerts for List 2
Supplies Alerts Displays the status, and whether to receive an E-Mail Alert, for consumables.
Paper Handling
Alerts Displays the status, and whether to receive an E-Mail Alert, for paper
handling.
Service Call Displays the status, and whether to receive an E-Mail Alert, for Service Calls.