Dell 2130cn Color Laser Printer - Manual (Page 25)

TCP/IP Settings
Purpose:
To configure TCP/IP settings.
Values:
Network Settings
Purpose:
To display the server settings of the Dell Printer Configuration Web Tool.
Values:
Diagnosis
Tray 2 Paper Size* 2 Specifies the size of paper loaded in the optional 250-sheet feeder.
Letter (8.5 x 11")
Folio (8.5 x 13")
Legal (8.5 x 14")
Executive (7.25 x
10.5")
Display Popup
Off
Does not display a popup message that prompts to set paper size and type when paper is loaded in the
standard 250-sheet tray and optional 250-sheet feeder.
On*
Displays a popup message that prompts to set paper size and type when paper is loaded in the
standard 250-sheet tray and optional 250-sheet feeder.
Apply New Settings After you complete the settings, press the Apply New Settings button to apply the changes.
Restart printer to apply
new settings
Press the Restart printer to apply new settings button to apply the changes.
* 1 "S2" means the print side 2 of the paper.
* 2 This item is only available when the optional 250-sheet feeder is installed.
IP Address
Mode
AutoIP*
Automatically sets the IP address.
A random value in the range of 169.254.1.0 to 169.254.254.255 that is not currently in use on the network is set as the IP
address. The subnet mask is set as 255.255.0.0.
DHCP Sets the IP address using DHCP.
BOOTP Sets the IP address using BOOTP.
RARP Sets the IP address using RARP.
Manually Set Manually sets the IP address.
IP Address* 1
Manually sets the IP address allocated to the printer.
It is allocated to the printer using the format nnn.nnn.nnn.nnn. Each octet that makes up nnn.nnn.nnn.nnn is a value in the
range of 0 to 254.
Subnet Mask* 2
Manually sets the subnet mask.
It is specified using the format nnn.nnn.nnn.nnn. Each octet that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to
255.
Gateway Address* 1
Manually sets the gateway address.
It is specified using the format nnn.nnn.nnn.nnn. Each octet that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to
254.
Apply New Settings After you complete the settings, press the Apply New Settings button to apply the changes.
Restart printer to apply new
settings
Press the Restart printer to apply new settings button to apply the changes.
* 1 127 and any value in the range of 224 to 254 cannot be specified for the first octet of a gateway address.
* 2 255.255.255.255 cannot be specified as the subnet mask.
NOTE: When the printer is connected to the local port, this setting cannot be displayed.
Display Displays the server settings of the Dell Printer Configuration Web Tool.
Display of EWS
Off Disable to display the server settings of the Dell Printer Configuration Web Tool.
On* Enable to display the server settings of the Dell Printer Configuration Web Tool.