Dell 2130cn Color Laser Printer - Manual (Page 159)

Print Server Settings
The Print Server Settings tab includes Basic Information, Port Settings, Wireless LAN, TCP/IP, NetWare, E-Mail Alert, and SNMP pages.
Basic Information
Purpose:
To configure the printer's basic information.
Values:
Port Settings
Purpose:
To specify whether to enable or disable printing ports and management protocol features.
Values:
Wireless LAN
Purpose:
To configure the detailed setting for the wireless network.
Values:
System
Settings
Printer Name Specifies the name of the printer using up to 31 alphanumeric characters.
Location Specifies the location of the printer using up to 63 alphanumeric characters.
Contact Person
Specifies the contact name, number, and other information of the printer's administrator and service center using
up to 63 alphanumeric characters.
Administrator E-Mail
Address Specifies the contact address of the printer's administrator and service center using up to 63 alphanumeric
characters.
Asset Tag Number Enter the asset tag number for the printer.
EWS Settings
Auto Refresh Sets whether or not to automatically refresh the contents of the status display pages.
Auto Refresh Interval
Sets the time interval for refreshing the contents of the status display pages automatically from 15 to 600
seconds.
NOTE: The Auto Refresh feature is effective for the contents of the Top Frame, Printer Status page, Job List page, and Completed Jobs page.
Ethernet* 1
Ethernet
Settings
Auto Detects Ethernet transmission rate and the duplex settings automatically.
10BASE-T
Half-Duplex
Selects 10Base-T Half-Duplex as the default value.
10BASE-T
Full-Duplex
Selects 10Base-T Full-Duplex as the default value.
100BASE-TX Half-Duplex Selects 100Base-T Half-Duplex as the default value.
100BASE-TX Full-Duplex Selects 100Base-T Full-Duplex as the default value.
Current Ethernet Settings Displays the current settings of Ethernet.
MAC Address Displays the printer's MAC address.
Port
Status
LPD Select the check box to enable LPD.
Port9100 Select the check box to enable Port9100.
WSD* 2 Select the check box to enable the WSD port.
NetWare* 2 Select the check box to enable the NetWare port. You can also configure the transport protocol to be used. TCP/IP can be
selected as the transport protocol.
E-Mail Alert Select the check box to enable the E-Mail Alert feature.
SNMP
Select the check box to enable the SNMP (Simple Network Management Protocol).
You can also configure the transport protocol to be used. UDP can be selected as the transport protocol.
* 1 The Ethernet settings are not displayed when the optional wireless printer adapter is installed.
* 2 An optional network protocol adapter is required to display the item.
NOTE: The settings in the Port Settings page will be valid only when the printer is rebooted. When you change or configure the settings, click the Apply
new settings button to apply new settings.
SSID Specifies the name that identifies the wireless network. Up to 32 alphanumeric characters.
Network Type Specifies the network type from either Ad-Hoc or Infrastructure.