Dell 2130cn Color Laser Printer - Manual (Page 29)

Purpose:
To print the reports for the total number of pages printed. When printed using either the printer control panel or Dell Printer Configuration Web Tool, the
report will be titled Print Volume Report.
Color Test Page
Purpose:
To print a page for testing colors.
Stored Document
Purpose:
To print a list of all files that are stored for Secure Print and Proof Print in the RAM disk.
Admin Menu
Use the Admin Menu menu to configure a variety of printer features.
Network
Use the Network menu to change the printer settings affecting jobs sent to the printer through the wired or wireless network.
Ethernet
Purpose:
To specify the communication speed and the duplex settings of Ethernet. Any changes made become effective after the printer is turned off and then on.
Values:
Status
Purpose:
To display the information on the wireless signal strength. Any change cannot be made on the operator panel to improve the status of the wireless
connection.
Values:
Reset Wireless
Purpose:
NOTE: The Stored Document is displayed only when the 512 MB or more optional memory is installed on the printer and RAM Disk under System Settings
is enabled.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Auto* Detects the Ethernet settings automatically.
10Base Half Uses 10base-T half-duplex.
10Base Full Uses 10base-T full-duplex.
100Base Half Uses 100base-TX half-duplex.
100Base Full Uses 100base-TX full-duplex.
Good Indicates good signal strength.
Acceptable Indicates marginal signal strength.
Low Indicates insufficient signal strength.
No Reception Indicates that no signal is received.
NOTE: This item is only displayed when an optional wireless printer adapter is installed.