Dell 2130cn Color Laser Printer - Manual (Page 34)

Values:
RAM Disk
Purpose:
To allocate memory to the RAM disk file system for the Secure Print and Proof Print features. Any changes made become effective after the printer is turned off
and then on.
Values:
Odd Page 2Sided
Purpose:
Specifies how the odd last page is printed when using duplex printing.
Values:
Substitute Tray
Purpose:
Specifies whether or not to use another size paper when the paper that is loaded in the specified tray does not match the paper size settings for the current
job.
Values:
mm/inch
Insert Position
Off* Does not print the banner sheet.
Front Prints on the beginning of document.
Back Prints on the end of document.
Front & Back Prints on both beginning and end of document.
Specify Tray* 1
Tray 1* The banner sheet is loaded in standard 250-sheet tray.
Tray 2 The banner sheet is loaded in optional 250-sheet feeder.
* 1 Only displayed when an optional 250-sheet feeder is installed on the printer.
Disable* Does not allocate memory to the RAM disk file system. Secure Print and Proof Print jobs will abort and be recorded to the job log.
50-500MB* 1
Specifies the amount of memory to allocate to the RAM disk file system. (50 MB step)
50-1000MB* 2
* 1 Only displayed when the optional 512 MB memory is installed.
* 2 Only displayed when the optional 1024 MB memory is installed.
NOTE: The RAM Disk menu is displayed only when 512 MB or more memory is installed on the printer.
NOTE: Restart your printer when you change the settings for the RAM Disk menu.
1 Sided* Prints the odd last page upside down to the paper.
2 Sided Prints the odd last page in normal direction to the paper.
Off No tray size substitute accepted.
Larger Size Substitutes paper of next largest size. When there is no larger paper size, the printer substitutes paper of nearest size.
Nearest Size* Substitutes paper of nearest size.