Dell 2130cn Color Laser Printer - Manual (Page 18)

When Using the Tool Box
1. Click start® All Programs® Dell Printers® Dell 2130cn Color Laser Printer® Tool Box.
The Select Printer dialog box opens.
2. Click the name of this printer listed in Printer Name, and then click OK.
The Tool Box opens.
3. Click the Printer Maintenance tab.
4. Select Reset Defaults from the list at the left side of the page.
The Reset Defaults page is displayed.
5. Click the Start button.
The printer is turned off automatically to apply the settings.
Initializing NVRAM for Network Settings
You can initialize the IP address and network-related settings by initializing NVRAM for Network settings.
1. Press Menu button.
2. Press button until Admin Menu appears, and then press (Set) button.
3. Press button until Network appears, and then press (Set) button.
4. Press button until Reset LAN appears, and then press (Set) button.
5. The Are you sure? message appears on the operator panel. Press (Set) button.
6. Turn off the printer, and then on again to apply the settings.
Back to Contents Page