Dell 2130cn Color Laser Printer - Manual (Page 160)

TCP/IP
Purpose:
To configure the IP address, subnet mask, and gateway address of the printer.
Values:
Wireless
Settings
MAC Address Displays the MAC address of the printer's wireless network adapter.
Link Channel Displays the channel number of the printer's wireless connection.
Link Quality Displays the quality of the printer's wireless network connection.
Security
Settings
Encryption Select the security method from the list.
WEP Key Code Select the WEP key code from either Hex or Ascii.
WEP Key
(Password) Specifies the WEP key set used through the wireless network only when WEP 128bits or WEP 64bits is selected
for Encryption.
Re-enter WEP Key Enter the WEP key again to confirm it.
Transmit Key
(Index)
Specifies the transmit key from the list.
Pass Phrase
(Password) Specifies the pass phrase from 8 to 63 alphanumeric characters only when WPA2-PSK AES or WPA-PSK AES,
WPA-PSK TKIP is selected for Encryption.
Re-enter Pass
Phrase
Enter the pass phrase again to confirm it.
NOTE: An optional wireless printer adapter is required to display the Wireless LAN page.
TCP/IP
Settings
IP Mode Specifies the IP mode.
Host Name Specifies the host name.
IPv4
IP Address Mode Selects the IP address mode.
Manual IP Address Sets the IP address.
Manual Subnet Mask Sets the subnet mask.
Manual Gateway Address Sets the gateway address.
IPv6
Use Manual Address Select the check box to set the IP address manually.
Manual Address
Sets the IP address. To specify an IPv6 address, enter the address and then "64"
after a slash (/). For details, consult your system administrator.
Manual Gateway Address Sets the gateway address.
DNS
DNS Domain Name
Specifies the domain name of the domain name server. Up to 255 alphanumeric characters, periods, and hyphens
can be used. If you need to specify more than one domain name, separate them using a comma or semicolon.
IPv4
Get DNS Server Address
from DHCP Select the check box to get the DNS server address automatically from the DHCP
server.
Manual DNS Server
Address
Sets the DNS server address.
IPv6
Get DNS Server Address
from DHCPv6-lite Select the check box to get the DNS server address automatically from the DHCPv6-
lite server.
Manual DNS Server
Address
Sets the DNS server address.
Priority to IPv6 DNS
Name Resolution
Select the check box to enable the DNS Name Resolution feature.
LPD
Connection Time-Out Sets the connection timeout period from 1 to 1000 seconds.
IP Filter (IPv4) To set the IP Filter settings, click IP Filter (IPv4). The IP Filter (IPv4) page is displayed.
Port9100
Port Number Sets the port number from 9000 to 9999.
Connection Time-Out Sets the connection timeout period between 1 and 1000 seconds.
IP Filter (IPv4) To set the IP Filter settings, click IP Filter (IPv4). The IP Filter (IPv4) page is displayed.
WSD* 1
Port Number Sets the port number to 80 or from 8000 to 9999.
Receive Time-Out Sets the receive timeout period from 1 to 65535 seconds.
Notification Time-Out Sets the notification timeout period from 1 to 60 seconds.
Maximum Number of
TTL
Sets the maximum number of TTL from 1 to 10.
Maximum Number of
Notification
Sets the maximum number of notifications from 10 to 20.
HTTP
Port Number Sets the port number to 80 or from 8000 to 9999.
Simultaneous
Connections
Displays the maximum number of connections received simultaneously by the client.
Connection Time-Out Sets the connection timeout period from 1 to 255 seconds.
IP Filter
(IPv4)*
2
Address
Sets the address in the address field. Enter a numeric value between 0 and 255 in each field of
"aaa.bbb.ccc.ddd." However, 127 and 224 to 254 cannot be used to "aaa."
Address Mask Sets the Subnet Mask in the Mask field. Enter a numeric value between 0 and 255 in each field.
Reject Rejects printing from specified network address.