Dell PowerVault 725N (Rackmount NAS Appliance) - Manual (Page 112)

9. Click Medium Changers in the right pane.
10. Double-click Unknown Medium Changer.
11. Click Driver in the Properties window.
12. Click Update Driver.
The Upgrade Device Driver wizard is displayed.
13. Click Next.
14. Click the radio button next to Search for a suitable driver for my device (recommended), and then click Next.
15. In Optional search locations, click the check box next to Specify a location, and deselect the other check box.
16. Click Next.
A dialog box displays with a field for you to enter the location of the device driver.
17. In the path for Copy manufacturer's files from, specify the folder name that contains the device drivers, and then click OK.
18. Click Next.
The Upgrade Device Driver wizard searches the specified folder for the driver files.
19. Ensure that the Upgrade Device Driver wizard has selected the appropriate PowerVault tape device, and then click Next.
20. Click Finish.
21. Click Close.
VERITAS Backup Exec 9.0 for Windows Servers
Installing VERITAS Backup Exec on the NAS System
1. Share the CD drive on a remote system, mount that remote CD drive on the NAS system, and then insert the VERITAS Backup Exec Installation CD into
the CD drive of the remote system.
2. Log in to the NAS Manager.
See " Logging in to the NAS Manager " in the "NAS Manager" section of this guide.
3. Click Maintenance.
4. Click Terminal Services.
5. Log in to the NAS system.
6. Map a network drive to the CD share, but do not select Reconnect at logon.
7. Follow the instructions in the documentation that came with your backup software.
Installing VERITAS Backup Exec Remote Administrator on a Client System
1. Insert the VERITAS Backup Exec Installation CD in the CD drive of the client system.
The CD starts the software automatically.
2. If the CD does not start the software automatically, open Windows Explorer, right-click the CD drive that contains the VERITAS software, and select
Autoplay from the menu.
NOTE: Before installing the backup software, check the Dell Support website at support.dell.com for the latest driver and software updates. You might
need to install the updates after completing the procedures below.
NOTE: VERITAS Backup Exec supports installation using Terminal Services and management using VERITAS Remote Administrator.
NOTE: After the software installation is complete, disconnect the network drive for the CD share before you reboot your system. To disconnect the
network drive, right-click My Appliance on the NAS system desktop, and select Disconnect Network Drive. Click the CD share in the Disconnect
Network Drive window, and then click OK.