Dell PowerVault 725N (Rackmount NAS Appliance) - Manual (Page 163)

The shares's properties window appears.
6. Click the Directory tab.
7. Check the Directory browsing box.
8. Click Apply.
9. Click OK.
Using MMC to Enable FTP Write Privileges
File Transfer Protocol (FTP) write privileges to the NAS system's default FTP site are disabled by default. To enable write privileges to the default FTP site using
MMC, perform the following steps:
1. Launch MMC as explained in " Microsoft Management Console " in this section of the guide.
2. Double-click Services and Applications to expand its list.
3. Double-click Internet Information Services to expand its list.
4. Right-click Default FTP Site and click Properties.
The Default FTP Site Properties window appears.
5. Click the Home Directory tab.
6. Check the Write box in the FTP Site Directory area.
7. Click Apply.
8. Click OK.
Using MMC to Delete FTP Shares
To delete FTP shares using MMC, perform the following steps:
1. Launch MMC as explained in " Microsoft Management Console " in this section of the guide.
2. Double-click Services and Applications to expand its list.
3. Double-click Internet Information Services to expand its list.
4. Double-click Default FTP Site to expand its list.
5. Right-click on the share you want to delete and click Delete.
Back to Contents Page