Network adapter teaming – Dell PowerVault 725N (Rackmount NAS Appliance) User Manual
Page 53
5.
On the Advanced Administration Menu, click System Management, and then click Set Regional Options to launch the Regional Options control panel.
6.
On the General tab, select the MUI language from the Your locale (location) drop-down menu, and then click Apply.
7.
Log off and log in to the system again for the new language MUI to take effect.
Installing and Configuring Support for Other Languages
The Windows Powered operating system that comes installed on your NAS system can be configured to support reading and writing documents in a number of
languages. To install the software required to support a specific language, perform the following steps:
1.
Insert the Multilingual Support CD into the NAS system's CD drive.
2.
From a client system, log in to the NAS Manager.
3.
Click Maintenance.
4.
Click Terminal Services.
5.
Log in to the system as an administrator.
6.
Close the Advanced Administration Menu by clicking Exit and then clicking OK.
7.
Double-click My Appliance on the NAS desktop.
8.
If this is a new system from Dell, perform the following steps, and then go to
. If you are performing this procedure after reinstalling your
a.
Double-click Control Panel.
b.
Double-click Regional Options.
9.
If you performed the reinstallation procedure on your system, perform the following steps:
a.
In Windows Explorer on a remote system, right-click the CD drive, and then click Sharing. In Sharing tab on the Compact Disk Properties page,
click the radio button next to Share this folder to share the CD drive, and then insert the Multilingual Support CD that came with the NAS system
into your remote system CD drive.
b.
Map a network drive to the CD share, but do not select Reconnect at logon.
c.
Browse to the mapped drive, and then double-click the Multilingual Support CD icon to launch the Multilingual Support CD's Web interface.
d.
Click the Install Language Locales Not Supported by MUI link to launch the Regional Options control panel.
10.
From the Language Settings for the System panel, select the languages to be configured.
11.
Set the default language for the system by clicking Select default... and selecting the appropriate language from the menu, and then click OK.
12.
Click Apply to complete the operation.
13.
If the Insert Disk window appears, you must perform the following steps:
a.
Click OK.
b.
In the Files needed window, click Browse, browse to the i386 directory on the Multilingual Support CD or in the C:\localization directory (which
does not exist if you reinstall the operating system), and then click Open.
c.
Click Open, and then click OK from the Insert Disk window to allow the operating system to find the required files for installation.
14.
15.
Reboot your system.
Network Adapter Teaming
Network adapter teaming allows the system to use the combined throughput of multiple network ports in parallel to increase performance or to provide fault
tolerance. Network adapter teaming on your NAS system supports the following technologies:
l
Link Aggregation
l
Fast EtherChannel (FEC)
l
IEEE 802.3ad
NOTE:
The default administrator user name is administrator and the default password is powervault.
NOTE:
Install additional language locales only if your preferred language is not available with MUI support or you need additional locale support.
NOTE:
The default administrator user name is administrator and the default password is powervault.
NOTE:
For more information about language settings, see the Microsoft Windows Powered operating system's online help.
NOTE:
When creating or removing network adapter teams, the IP address of the NAS system's LAN connections changes. To prevent disconnection from
the NAS system during team configuration, connect a keyboard, monitor, and mouse to the NAS system when creating or removing teams. See "Initial
Configuration" before configuring your teams.