Dell PowerVault 725N (Rackmount NAS Appliance) User Manual
Page 89
4.
In the Tasks list, click New.
5.
Follow the instructions in the Job Template Wizard.
When the Job Template Wizard completes, the Run Jobs page displays.
Running a New Job Template
1.
Create a new job template as described in "
" in this section of the guide.
When the Job Template Wizard completes, the Run Jobs page displays.
2.
In the Object/Task Selector of the Run Jobs page, select the new job template.
3.
Click Run.
4.
Follow the instructions in the Run Job Wizard.
Using Sample MDM Scripts
Sample scripts are located in the c:\MDMScripts directory on your NAS system. They include scripts that join systems to a domain or workgroup, create users,
verify a Microsoft QFE installation, or change user passwords. You can either run these scripts or make them part of a job template.
JoinDomain.vbs Script
The JoinDomain.vbs script joins a specific NAS system or device set to a domain.
The parameters of the JoinDomain.vbs script to join a domain are:
-join <domainname> <username> -password <password>
Where domainname is the name of the domain, username is the name of a user on the domain, and password is the domain user's password.
The parameters of the JoinDomain.vbs script to join a workgroup are:
-workgroup <workgroupname>
where workgroupname is the name of the workgroup.
CreateUser.vbs Script
The CreateUser.vbs script adds a user to a specific NAS system or device set.
The parameters of the CreateUser.vbs script are:
NOTE:
To see an example of how each script is used, type ? (question mark) in the parameter field and then run the job. The output shows script
usage.
NOTE:
When script parameters include a password, the password must be entered for each job run. If a password is included in a template, the
password will be replaced by an asterisk (*). The script will not run until the asterisk (*) is replaced with a valid password.