Dell PowerVault 725N (Rackmount NAS Appliance) - Manual (Page 76)

The NAS Manager supports clients running Microsoft Internet Explorer 5.5 or later (or Netscape Navigator 6.2.2 or later for the Red Hat® Linux operating
system).
2. Type in the name of the NAS system in the Web address field, and then press <Enter>.
The default system name is Dellxxxxxxx, where xxxxxxx is the system's service tag number, which is located on the top of the system. For example, if
your service tag number is 1234567, enter http://DELL1234567.
The NAS Manager is served on port 1279 and is accessed using the following Web address: https://systemname:1279 or
https://system_ipaddress:1279, where systemname is Dellxxxxxxx (xxxxxxx is the system's service tag number). For example, if your service tag
number is 1234567, you would enter https://DELL1234567:1279. Port 1279 uses secure socket layer (SSL) to encrypt data going to and coming from the
NAS system to provide data security.
3. When the Enter Network Password window displays, type the administrator user name and password and then click OK.
4. Click Administer this server appliance.
5. When the Security Alert window displays, click Yes.
6. When the Enter Network Password window appears again, enter the same user name and password that you entered in step 3 , and then click OK.
You are now logged in to the NAS Manager.
Default Administrator User Name and Password
When logging into the NAS system for the first time, you must enter an administrator user name and password. The default administrator user name for your
NAS system is administrator and the default password is powervault.
Basic Navigation
When navigating the NAS Manager, use the buttons within the program to go backward and forward.
The top of each page of the Web user interface (UI) displays a status area, as well as primary and secondary menu bars, and the body of each page displays
specific content related to each functional area.
Status Area
The following information is displayed in the top band of the NAS Manager Web UI:
l System host name
l System status, which displays the following status conditions:
¡ Normal (green text)
¡ Informational (grey text)
¡ Warning (yellow text)
¡ Critical (red text)
Clicking Status: <status_type> takes you to the Status page.
NOTICE: Although port 1278 can be used, it uses plain text authentication, which can be a significant security risk. Therefore, using port 1278 is not
recommended.
NOTE: The NAS Manager default administrator user name is administrator and the default password is powervault.