Tips – Sony DHC-MD555 User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Playing an MD (continued)

To

Do this

Stop play

Press I for the MD.

Pause

Press

C>II for the MD (or MD

II on the remote). The light on
the

[>ll button changes from

green to orange.
Press again to resume play.

Select a track

Turn MULTI JOG clockwise (to
go forward) or counter­
clockwise (to go back) and
release it when you locate the
desired track (or press MD

or on the remote
repeatedly).

Find a point in

Keep pressing

«

or ►►

a track

during play and release it at the
desired point.

Select an MD

• Press MD 1-5. Play starts

when the button is pressed.

• Press MD D.SKIP on the

remote repeatedly so that the
MD 1-5 button is lit green.
Press

O-ll for the MD (or

MD O on the remote) to
play the selected MD.

If you press MD 1 - 5 (or MD
D.SKIP on the remote) during
play, the selected MD changes
and the new MD starts playing.

Remove an MD Open the MD cover and pull

the MD out from the slot. If the

MD has been loaded inside the
unit, (i.e., the corresponding
MD 1-5 button is lit green),
press MD — so that the MD is
returned to the slot, and then
pull the MD out from the slot.

Adjust the

Turn VOLUME (or press VOL

volume

to 1

”)

remote).

Do not use an MD on which the label sticks out
from the edge or on which the label is not
positioned correctly. Such labels can cause the MD
deck to malfunction.

Tips

• You can switch from another source to the MD

deck and start playing an MD just by pressing
[>ll for the MD (or MD O on the remote) or
MD 1 - 5 if an MD is loaded in the slot

(Automatic

Source Selection).

However, if an MD is used in a

program, play does not start even if you press MD

1

-

5

.

• The MD 1-5 button indicators have the following

meanings when lit.

Green: The MD loaded in the slot is selected or

playing.

Orange: An MD is loaded in the slot.

• If an MD is not loaded to any of MD 1-5,

"No Disc" appears.

• You can also select and start playing a track in

step 4.

1

Press MD D.SKIP on the remote and select the

desired MD.

2

Turn MULTI JOG (or press MD or on

the remote) until the desired track number

appears.

3 Press Oil for the MD (or MD t> on the

remote).

• If you select or play a track on the MD recorded in

monaural format, "MONO" indication lights
white.

Note

20

Advertising