Sony DHC-MD555 - Manual (Page 48)

Adjusting the
recording ievei
When recording on an MD, you can adjust
the recording level to the desired volume.
You can adjust the recording level not only
when making an analog recording, but also
when making a digital recording from a CD,
etc.
4,5 3 4,6
1
2
Prepare the sound source you want
to record and start play.
Confirm that the MD deck is in
recording standby.
If not, press REC.
3
Press MENU/NO twice so that
"Setup Menu" appears.
4
Turn MULTI JOG until "Level
Adjust ?" appears, then press
ENTER/YES.
Turn MULTI JOG to adjust the
recording level.
While monitoring the sound, adjust to
the optimum level while making sure
that "OVER" does not appear in the
display at the loudest portion.
Once you have adjusted the recording
level, stop playing.
Adjust the level so that
"OVER" does not appear
6
Press ENTER/YES.
7
Press
oil
for the MD.
Recording starts.
When recording a CD, etc., start playing.
To stop recording
Press ■ for the MD.
Tips
• You can also adjust the recording level during
recording. Do steps 3 to 6 while recording, and
press MENU/NO.
• Once adjusted, the recording level is niaintained
until you adjust it again.
48