To cancel the tr erase function, To return to the condition before erasing, Note – Sony DHC-MD555 User Manual
Page 54: Erasing all tracks (all erase function)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
MD1-S ■
Erasing recordings (continued)
1
Press FUNCTION repeatedly to
switch the function to MD.
2
Press MD D.SKIP on the remote
repeatedly until the button of the
desired MD lights green.
If the MD appears in the slot, press — to
load the MD (to the recording/playing
unit).
3
Press MENU/NO so that
"Edit Menu" appears.
4
Turn MULTI JOG until "Tr Erase?"
appears, then press ENTER/YES.
The MD deck starts playing the
displayed track.
5
Turn MULTI JOG until the desired
track number appears.
Press ENTER/YES.
"Complete!!" app>ears for a few seconds
and the selected track and title are
erased. The MD deck starts playing the
track following the erased track.
To cancel the Tr Erase Function
Press ■ for the MD.
To return to the condition before
erasing
You can return to the original condition
immediately after erasing a track (see
page 61).
Note
"Tr Erase ???" appears when the track was recorded
or edited on another deck and is record protected.
To erase the track, press ENTER/YES while
"Tr Erase ???" is displayed.
Erasing all tracks
(All Erase Function)
You can erase the disc title, all recorded
tracks and their titles at once.
MD 1 - 5
4 3
4,5
1
Press FUNCTION repeatedly to
switch the functiort to MD.
54