To stop recording, Before pulling out the power cord, Notes – Sony DHC-MD555 User Manual

Page 77: Adjusting the recording ' level, Copying track titles, Marking track numbers

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

5

Press ► on the MD WALKMAN,
The MD WALKMAN starts playing and
the system starts recording
simultaneously to the MD.
When recording is complete, press ■ for
the MD on the system first, then press ■
on the MD WALKMAN to stop
recording.

To stop recording

Press ■ for the MD on the system first, then
press ■ on the MD WALKMAN.
The sound from the speakers drops out
momentarily and the recording stops.

Before pulling out the power cord
MD recording is completed when the MD Table of
Contents (TOC) is updated. The TOC is updated
when you eject the MD or press l/C!) (power) and
turn off the system. Do not pull out the power cord
before updating the TOC (while 'TOC" is lit) or
while updating the TOC (while "TOC" is flashing)
to ensure the complete recording.

Notes
• If you start MD WALKMAN SYNC recording

with the MD WALKMAN set to stop mode,
silence may be recorded for the first few seconds
until the MD WALKMAN starts playing.

• When you stop or pause the recording, the sound

from the speakers may drop out for up to about 3
seconds, but this does not indicate a malfunction.

• The Smart Space and Level Synchro Recording

features do not operate.

Adjusting the recording

' level

You can adjust the recording level by doing
the following operations after step 3.

1

Press MENU/NO twice so that "Setup

Menu" appears.

2

Turn MULTI JOG until "Level Adjust ?"

appears.

3 Press ENTER/YES.

4

Turn MULTI JOG to select the desired

recording level.

5 Press MENU/NO.

Copying track titles

When you record from a portable MiniDisc
player, you can copy the title of the current
track.

Models:

MZ-E45 {Hong Kong only), E44, E35, E30,

E25, EPll

1

While recording, press NAME EDIT/

CHARACTER.
If the current track has a title, the title
appears.
If die track does not have a title, you can
input a track title. (To input a track title, do
steps 4 to 7 on pages 51 and 52.)

2

Press ENTER/YES.

The displayed track title is copied.
To copy track titles after editing, perform
steps 1 to 8 in "Labeling an MD" (page 51).

Notes

• If you start recording from part-way through a

track, the track title may not be copied.

• If you copy track titles with a portable MiniDisc

recorder (MZ-R5ST (Europe only), R50, R30),
incorrect characters may appear.

Marking track numbers

Press REC while recording at the point you
want to add a track mark.
A track number is marked at that point.

Tip
When you record from a portable MiniDisc player,
the track numbers are automatically marked as on
the MD in the player.

Notes

• When you record from a portable MiniDisc

recorder, the track numbers may not be marked as
on the MD in the recorder. In these cases, use the
edit function to remark the track numbers after
you finish the recording.

• The Level Synchro Recording feature does not

operate while recording the sound from the MD
WALKMAN.

3

Ifi

0

•o

0

3

SL
m

A

e

•6'

3

A

3

1

3

o

S

>

r

3

>

z

77

Advertising