Sony DHC-MD555 - Manual (Page 9)

Turn MULTI JOG and set the day,
then press ENTER/YES.
The hour indication flashes.
(For models using a 12-hour system,
■ noon is indicated as 0:00 PM, and
midnight as 0:00 AM.)
3
Turn MULTI JOG and set the hour,
then press ENTER/YES.
The minute indication flashes.
Turn MULTI JOG and set the
minute, then press ENTER/YES.
The clock starts working, and the clock
display disappears.
If you made a mistake
Press CURSOR «— or —► until the indication
you wish to change (day, hour, minute)
flashes, then change the setting.
Showing the time
In order to conserve power, this system is set
at the factory to not display the clock when
the system is off
(Power Saving Mode). To
display the clock even when the system is off,
press UPPER (or LOWER) DISPLAY while
the system is off. Press the button again to
turn the clock display off and activate the
Power Saving Mode.
While the system is on, the information that
appears at the top of the display changes as
follows each time you press UPPER
DISPLAY.
c
Preset Equalizer name —► Clock ■
— Name* *--------------Volume •*-
• Displayed only when disc title, track title, radio
station name or other name information is labeled.
No display when this information is not labeled.
Tip
The upper dot of the clock display flashes for the
first half of a minute (0 to 29 seconds), and the lower
dot flashes for the last half of a minute (30 to
59 seconds).
Changing the preset time
You can also set and change the time while
the system is on.
1 Press CLOCK/TIMER SET.
2 Turn MULTI JOG until "CLOCK SET ?"
appears.
3 Press ENTER/YES.
4 Perform steps 2 to 4 of "Setting the time".
C\
(6
a
5
‘
to
VI
fti
tb
a