To confirm/clear the selected contents, Tips, Before pulling out the power cord – Sony DHC-MD555 User Manual

Page 39: Seamless recording

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

To confirm/clear the selected
contents

Press MD 1-5 after step 4.
Each time the button is pressed, the
programmed CD disc numbers and track
numbers for the selected MD appear in order.

To clear the displayed contents, press
CLEAR. The displayed contents are cleared.
To program additional tracks, continue from
step 2.

Tips

• When you record from CD 1 - 5 to MD 1-5, select

a CD and MD with the same numbers in steps 2
and 4 of "Recording your favorite tracks". (Step 3
is not needed.) If you record on an unrecorded or
completely erased (see page 54) MD, the disc title
assigned to the CD (see page 31) is copied as it is
to the MD (Disc Memo Copy). Depending on the
disc, CD text information may also be copied. If
"TEXT" flashes during recording, press NAME
EDIT/CHARACTER, and then ENTER/YES to
record the title of the current track. (If "TEXT" is
lit, it is automatically copied.)

You can also freely select the CD and MD
numbers for recording, for example, from CD 1
and CD 2 to MD 1, and from CD 3 and CD 4 to
MD2.

• While recording, the light of the CD 1-5 buttons

and the MD 1-5 buttons indicates the following;
Green: CD/MD that is currently recording
Orange: CD/MD that is currently standing by for

recording

Off; Unselecled CD/MD

• If the MD is record-protected, "Cll" and

"Protected" appear alternately and the MD cannot
be recorded (see page 35).

• If the MD ends during recording, the CD and MD

• stop (even if recording was still in progress), and

recording begins on the next MD.

Before pulling out the power cord
MD recording is completed when the MD Table of
Contents (TOC) is updated. The TOC is updated
when you eject the MD or press 1/(1) (power) and
turn off the system. Do not pull out the power cord

before updating the TOC (while "TCX^" is lit) or
while updating the TCXZ (while "TOC" is flashing)
to ensure the complete recording.

Recording multiple
CDs in succession on
multiple MDs

Seamless Recording

You can record all of the loaded CDs onto all
of the loaded MDs in sequence.
For example, you can record 5 single CDs in
succession on an MD.

,CD4^

,CD5^

You can also record a 5-disc album on 3 MDs.

^D.-k

. MD^

MD2

_ -----

MP3

D5;

so

to

3

to

0

3

ft)

3

s

a

1

?

8

S.

5

ifi

fii
n

Q

continued

39

Advertising