Sony DHC-MD555 - Manual (Page 40)

Recording multiple CDs in
succession on multiple MDs
(continued)
J Insert the recordable MDs in order
from the MD 1 slot.
Recording starts in order from the MD in
the MD 1 slot. Remove any unwanted
MDs from the slots.
If the MDs have been partially recorded,
recording starts after the recorded tracks.
2
Press SEAMLESS.
Press ENTER/YES.
"SYNC" flashes for a while, and then
remains lit. The MD deck stands by for
recording, and the CD player is in pause
for playing.
M rn - 1 0 . 0 0
0 . 0 0
^ Confirm that "SYNC" is now lit,
and then press Oil for the MD.
CD playing and MD recording start.
If all the tracks cannot fit on a single MD,
recording switches automatically to the
next MD. The CD player and MD deck
stop automatically when the recording of
all the loaded CDs is completed.
To cancel recording
Press SEAMLESS.
To stop recording
Press ■ for the MD.
Before pulling out the power cord
MD recording is completed when the MD Table of
Contents (TOC) is updated. The TOC is updated
when you eject the MD or press l/(!) (power) and
turn off the system. Do not pull out the power cord
before updating the TOC (while "TOC" is lit) or
while updating the TOC (while 'TOC" is flashing)
to ensure the complete recording.
Note
If all the tracks cannot fit on a single MD, recording
switches automatically to the next MD. Be sure to
msert the recordable MDs beforehand and remove
any unwanted MDs from the slots.
40