Note, Step 2: setting the time – Sony DHC-MD555 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Inserting two R6 (size AA)
batteries into the remote
step 1: Hooking up the system
(continued)
Always insert the batteries
from the © end as shown
in the illustration.
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
Step 2: Setting the
time
You can set the time while the system is off.
You must set the time beforehand to use the
timer-recording and other timer functions.
The clock is on a 24-hour system for the
European model, and a 12-hour system for
other models.
The 12-hour system is used for illustration
purposes.
UPPER
DISPLAY
LOWER
DISPLAY
1
Press CLOCK/TIMER SET.
The time setting display appears, and the
day indication "SUN" flashes.