Video cd in a desired order, 3 press enter, Repeat steps 2 and 3 to program other tracks – Sony XD-DV300 User Manual
Page 29: 5 press ►play, To check the programmed order, To delete a programmed track, To clear the programmed contents, Adding a programmed track in stop mode, To cancel programmed playback, Uj cc o
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VIDEO CD IN A DESIRED ORDER
3 Press ENTER.
^ Repeat steps 2 and 3 to program other
tracks.
5 Press ►PLAY.
The programmed tracks are played in the specified order.
If you press BSTOP or the last programmed track ends,
the player stops and the programming menu is displayed.
Programmed playback may not be used with video CDs when the
PBC feature is turned on.
To check the programmed order
Each time ►M is pressed in stop mode, a program number and
a track number are shown on the display of the DVD player.
To delete a programmed track
1 While stopped, press PROGRAM so that “PROGRAM” is
displayed. Within 3 seconds, press ENTER.
2 Press C. The last programmed number is canceled.
To clear the programmed contents
While stopped, press BSTOP. All the programmed contents are
cleared.
When the iiOPEN CLOSE is pressed or the power is turned off,
all the programmed contents are also cleared.
Adding a programmed track in stop mode
Press numbered button(s) to select a track to be added,
selected track is programmed to the last position.
To cancel programmed playback
Press PROGRAM twice.
(/}
LU
CC
2
UJ
CC
o
If the Disc Resume is set to on (See page 43), the programmed
contents can not be cleared when BSTOP is pressed, in this
case, press BSTOP twice while stopped.
The
ENGLISH
29