Sony XD-DV300 - Manual (Page 40)

CHANGING SETUP VALUES (CONTINUED)
dts Output:
Sets the dts output as to whether the connected amplifier contains
a DTS decoder or not.
[T] At the initial setting screen, select “Audio Output Setting”
by using AT. Then press ENTER.
[2]Use AT to move the cursor (the yellow area) to “dts
Output”.
Down Mix Type:
Sets the analog output to be output from the audio output connector
of DVD player.
|T] At the initial setting screen, select “Audio Output Setting”
by using AT. Then press ENTER.
[^Use AT to move the cursor (the yellow area) to “Down
Mix Type”.
Choice The Item A T
3 L./WV1M 1 IVIIA
•' V
ENTER: Choice item RETURN: Previous menu
SETUP: Completion ENTER: Choice item RETURN: Previous menu
SETUP: Completion_________________________
1] Press ENTER.
[4] Use AT to move the cursor (the yeiiow area) to the suitabie
[3] Press ENTER.
Use AT to move the cursor (the yeiiow area) to the suitabie
setting. setting.
Choice Tho Item A T Choice The Item A T
2 dts OFF
> V •
2 Surruuno Mode
ENTER; Choice item RETURN: Previous menu
SETUP: Completion ENTER : Choice item RETURN : Previous menu
SETUP : Completion
dts ON
Select this option if your DVD player is connected to an ampiifier
which contains DTS decoder.
dts OFF
Seiect this option if your DVD player is connected to an amplifier
which does not contain DTS decoder.
] Press ENTER.
Your entry is saved.
] Press o'^RETURN to return to the previous screen or press
SETUP to exit the setup menu.
CAUTION
n the AV amplifier is not equipped with a DTS decoder,
do not select “dts” in the “Audio Output Setting” when
connecting the AV amplifier with an optical connecting
cord.
Merely attempting to play a DVD may cause a high level of
noise which could be harmful to your ears and damage the
speakers. In such a case, be sure to select “Down Mix PCM”.
Stereo Mode
Select this option if your DVD player is connected to an amplifier
via an audio cable.
Surround Mode
Select this option if your DVD player is connected via an audio
cable to an amplifier which contains a Dolby Prologic Surround
decoder.
[U Press ENTER.
Your entry is saved.
[6] Press o*^RETURN to return to the previous screen or press
SETUP to exit the setup menu.
40
ENGLISH