Troubleshooting, Dvd has many capabilities, To reset – Sony XD-DV300 User Manual

Page 47

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TROUBLESHOOTING

If something seems to be wrong with your DVD player, first check the items in the table below.

Symptom

Check

See page

The power does not come on.

• Make sure the power cord is plugged firmly info a live outlet.

8

A disc does not play.

• Is there condensation inside the DVD player? (Leave the player idle with

2

Playback stops almost

the power on for 1 to 2 hours.)

immediately.

• Are you trying to use a disc that can’t be played, such as a CD-ROM?

4

• Is the disc dirty? Is it loaded properly?

5, 20

• Does the disc exceed the specified rating level?

42

No picture

• Is the DVD player connected correctly?

8

• Are the video connections firmly attached?

8

• Is the television video mode set correctly?

20

The picture is bad.

• Is the player in a place with lots of vibration?

8

• Are the video connections firmly attached?

5

• Is the disc dirty?

• Is the DVD player connected directly to the television set? Or is it

connected through a video deck, a selector switch, or a television with a
built-in video deck?

The picture may be bad when used with some television sets or projectors,
due to the DVD copy protection scheme.
The picture quality may also suffer if the DVD player is connected through

a selector switch with other video equipment. Try turning off the power

to the other video equipment.

The picture quality may be somewhat poor when paused, when doing

Frame Advance, or during fast forward or fast reverse. This is normal.

8

No sound

• Is the DVD player connected correctly?

8

• Are the audio connections firmly attached?

8

• Is the connected audio equipment turned on? Is the volume set correctly?

(Note that there will be no audio playback during slow playback. Frame

Advance, fast forward, or fast reverse.)

20

The remote control does not

• Are the remote control batteries installed correctly?

19

work, or does not work

• Is the remote control too far from the main unit? Is there something in

19

correctly.

the way?

• Are the remote control batteries getting weak?

19

• Is the DVD player in sunlight or strong fluorescent light?

19

<

UJ

u

UJ

z

DVD has many capabilities
Some of these capabilities may differ based on the disc being
played. The following situations may be caused by information on
the disc itself.

• The audio or subtitles are not reproduced in the specified

default language.

• The audio track or subtitles cannot be changed.
• There are no subtitles.
• No DVD menu. The DVD menu does not display in the

language you want.

• The view angle cannot be changed.

• Everything on the disc is played back regardless of the rating

level you have set.

To reset

While the power is off, by pressing POWER on the main unit while
pressing ENTER and SETUP on the main unit simultaneously,

the initial condition is restored and “CLEAR” appears on the display.

As all the settings after purchase return to initial condition, set

them again.

ENGLISH

47

Advertising