SINGER 8500Q MODERN QUILTER Instruction Manual User Manual

Page 14

Advertising
background image

12

WINDING BOBBIN

1. Place a spool of thread on the spool pin, and secure it with

the spool pin cap. Pull the thread out from the spool and

place it through thread guides as shown in illustration.

2. Put end of thread through the hole in bobbin as shown.

Place bobbin onto the bobbin winder spindle as far as it

can go.

3. Holding onto the end of the thread, push the bobbin winder

latch against the bobbin until it clicks and bobbin starts to

rotate.

4. Bobbin will disengage automatically and the winding

mechanism will stop when the bobbin is full. Remove the

wound bobbin and cut the thread tail.

Be sure to use only SINGER Class 15J bobbins

(not standard Class 15 bobbins) in this

machine.

1

2

3

4

Advertising
This manual is related to the following products: