Buttonholes using buttonhole foot, Procedure – SINGER 8500Q MODERN QUILTER Instruction Manual User Manual

Page 54

Advertising
background image

52

(A)

(B)

(C)

(C)

(C)

(C)

Tab A
Butée A
Lengüeta A

Tab B

Languette B

Lengüeta B

Buttonhole foot

Pied boutonnière

Prensatelas de ojales

BUTTONHOLES
USING BUTTONHOLE FOOT

1. Insert a button in between tab A and tab B.

2. Buttonholes can be sewn to match the size of the button.

PROCEDURE

* Use an interfacing in the area of the garment where

buttonholes are placed. Stabilizer should also be used.

* Make a practice buttonhole on a scrap of the fabric with the

selected button.

1. Select one buttonhole pattern.

2. Replace the presser foot with the buttonhole foot. (Refer to

“Changing presser foot” on page 22 - 23.)

3. Insert the button into the buttonhole foot. (Refer to “Using

buttonhole foot” above.)

4. Set the buttonhole lever (C) so that it drops down vertically

between the stoppers (A) and (B).

It is helpful to remove the extension table when sewing a

buttonhole, to keep the foot from vibrating when moving

across the table.

94

96

98

95

97

99

Advertising
This manual is related to the following products: