SINGER 8500Q MODERN QUILTER Instruction Manual User Manual

Page 70

Advertising
background image

68

CLEANING HOOK AREA AND FEED

DOGS

CAUTION

Always disconnect the machine from power

supply by removing the plug from the wall-outlet.

To ensure the best possible operation of your machine, it

is necessary to keep the essential parts clean at all times.

1. Raise the needle to its highest position.

2. Remove two screws on the needle plate (1) and slide the

needle plate toward you as illustrated for removal.

3. Remove the bobbin case (2).

4. Clean the feed dogs and hook area with the lint brush.
Put one drop of sewing machine oil on the hook race as

indicated by the arrows. (A, B)

5. Replace the bobbin case with the projection (3) positioned

against the spring (4).

6. Make sure that the needle is at its highest position and put

and slide the needle plate into position as illustrated.

Cleaning the sewing machine and footcontroller

After using, keep sewing machine and footcontroller clean.

Use dry rags to remove dust from the sewing machine and

footcontroller.
NOTE: Use dry rags to avoid electrical shock.

NOTE: SINGER Brand Sewing Machine Oil is

VXJJHVWHG '2 127 XVH ³DOO SXUSRVH´ RLO DV LW LV QRW

suited for sewing machine lubrication.

2

1

3

4

5

(3)

(4)

(2)

(A)

(B)

6

(1)

Advertising
This manual is related to the following products: