SINGER 8500Q MODERN QUILTER Instruction Manual - Manual (Page 86)

84
Programming the Memory
To access the memory, touch the ABC Program Mode button.
To view what stitches can be programmed into the memory, turn the top Stitch Selection Dial. By turning
this dial, you can view the stitches that can be programmed into the memory. Only the stitches that are
displayed can be used for this purpose.
The decorative stitches that can be programmed are numbered as follows: 17, 21, 28, 29, 30, 32, 34, 35, 41
through 67. Also included are all the available numbers, letters and punctuation symbols.
As an example we will be programming the tulip (Stitch #34) at the start and the end of the word SINGER.
1) Turn the top dial (Stitch Selection Dial) until you see 34 at the top of the screen.
Push in the top dial (Stitch Selection Dial) to enter this stitch into memory. The tulip stitch will be displayed at
the top of the screen.
2) Turn the top dial (Stitch Selection Dial) until you see the S at the top of the screen.
Push in the top dial (Stitch Selection Dial) to enter this stitch into memory. The S will be displayed at the top
of the screen.
3) Turn the top dial (Stitch Selection Dial) until you see the I at the top of the screen.
Push in the top dial (Stitch Selection Dial) to enter this stitch into memory. The
I will be displayed at the top
of the screen.
4) Turn the top dial (Stitch Selection Dial) until you see the N at the top of the screen.
Push in the top dial (Stitch Selection Dial) to enter this stitch into memory. The N will be displayed at the top
of the screen.
5) Turn the top dial (Stitch Selection Dial) until you see the G at the top of the screen.
Push in the top dial (Stitch Selection Dial) to enter this stitch into memory. The G will be displayed at the top
of the screen.
6) Turn the top dial (Stitch Selection Dial) until you see the E at the top of the screen.
Push in the top dial (Stitch Selection Dial) to enter this stitch into memory. The E will be displayed at the top
of the screen.
7) Turn the top dial (Stitch Selection Dial) until you see the R at the top of the screen.
Push in the top dial (Stitch Selection Dial) to enter this stitch into memory. The R will be displayed at the top
of the screen.
8) Turn the top dial (Stitch Selection Dial) until you see 34 at the top of the screen. Push in the top dial
(Stitch Selection Dial) to enter this stitch into memory. The tulip stitch will be displayed at the top of the
screen.
The bottom of the screen should now display 08
---
08