Canon FAX-L800 - Manual (Page 118)

Canon FAX-L800 User’s Guide ENGLISH
6-16 Chapter 6 Sending Documents
If you make a mistake during dialling, press STOP to return to standby and
start again.
4. When you hear the other party answer the call, you can talk.
When you hear the other party answer, pick up the handset so you can talk if
you have not already done so. Then go to step 5.
-or-
If you hear a high pitched signal, instead of the other party’s voice, they are
ready to receive your document. Go to step 7.
5. Ask the other party to press the start button on their fax and then hang up
their handset.
6. After the other party presses the start button on their fax, you will hear a
high pitched signal.
7. Press START/SCAN on your fax and hang up your handset.
The fax begins to send the document. If the offhook alarm starts beeping,
make sure the handset is resting properly on the handset cradle.
Re-dialling When the Line is Busy
If the other party’s line is busy or if there is no answer, the fax waits two minutes
and then dials the same number again. This feature is called automatic redialling.
What is Automatic Redialling?
After the initial dial attempt, the fax will wait two minutes and try to dial again.
If the second attempt fails, the fax will again wait for two minutes and make a
final attempt to complete the call.
Auto redial can be turned off and on. The number of redialling attempts and the
time interval between attempts can be set up with the auto redial feature.
(
Q6-10)