Canon FAX-L800 - Manual (Page 172)

Canon FAX-L800 User’s Guide ENGLISH
8-24 Chapter 8 Using the Memory Features
SET 3. Press SET.
SUBADDRESS
1
4
7
2
5
8
0
3
6
9
ABC
GHI
PQRS
JKL
TUV
M NO
WXYZ
DEF SET 4. Use the buttons on the numeric keypad to enter the ITU-T subaddress of the
memory box holding the document you want to print. Then press SET.
MEMORY BOX RX
PASSWORD
If you have not set the operation password, the documents starts printing.
1
4
7
2
5
8
0
3
6
9
ABC
GHI
PQRS
JKL
TUV
M NO
WXYZ
DEF SET 5. Enter the four-digit operation password that protects the memory box setup
and press SET.
After you enter the operation password, the document starts printing.
MEMORY BOX RX
PRINTING
P.001/001
What Happens to Memory after a Power
Failure
If power to the fax is lost due to a power failure, or if the fax is accidentally
unplugged, a built-in battery keeps a trickle of current supplied to the memory so
all the documents currently stored in the memory can be saved for up to
approximately 12 hours.
How Your Registered Data Is Protected
This is what happens when the fax is disconnected:
½ The backup battery takes over and keeps a trickle of current flowing to the
memory in order to preserve all the documents in the memory waiting to be
sent or printed.
½ However, if the fax is left off for longer than approximately 12 hours, all
documents in the fax memory will be lost after the battery runs down, and as
soon as power is restored to the fax a Memory Clear List is printed that
shows you what documents were erased. (
Q14-15)