Canon FAX-L800 - Manual (Page 93)

Canon FAX-L800 User’s Guide ENGLISH
4-29 Chapter 4 Setting Up and Using Speed Dialling
SET DOCUMENT
½ If you press CODED DIAL and a three-digit code where no numbers are
registered, the fax tells you:
NO TEL#
* 013
½ If you want to cancel the transmission after you press the buttons for Coded
Speed Dialling, press STOP.
½ When you come to a step in any procedure where you have to dial a number,
you can press the buttons for Coded Speed Dialling to dial.
When you register a number for One-touch Speed Dialling, Coded Speed
Dialling and Group Dialling, you can, as an option, set the time you want your
document to go out (up to 5 different times in a day). If you are using a speed
dial button that was set by someone else, and you would like your document to
go out at the preset time, verify if the preset time feature is being used for that
button. (
Q4-9, 4-17, 4-24, 16-27)
Using Group Dialling
Follow this procedure to start a transmission and send a document to several
destinations with a One-touch or Coded Speed dialling number registered for
group dialling.
To use this feature, you must first register a group of telephone numbers for One-
touch or Coded Speed Dialling. (
Q4-22)
1. Set the document on the fax. ( Q6-3)
Set the document resolution, contrast, and document type. (
Q6-4)
You can also select a sender’s name with the TTI SELECTOR. ( Q6-6)
DOCUMENT READY