Canon FAX-L800 - Manual (Page 63)

Canon FAX-L800 User’s Guide ENGLISH
3-21 Chapter 3 Getting Started
11. Press STOP to return to standby.
After the fax machine enters the energy saver mode, only the energy saver
indicator on the operation panel remains on and the LCD display shows:
ENERGY SAVER
Returning to the Full Power Mode
The display tells you the fax has entered the energy save mode with this message:
ENERGY SAVER
ENERGY SAVER The indicator under the energy saver button to the right of the LCD display will
also light red.
To restore the full power mode, press the ENERGY SAVER button. While the
fax machine is powering up, PLEASE WAIT is displayed for a few moments.
PLEASE WAIT
While the fax unit is powering up, you can perform any operation.
The following actions will automatically restore the full power mode:
½ Receiving a document.
½ Printing an Activity Management report pre-set for printing.
½ Answering a call.
You can awaken the fax from the low-energy sleep mode by:
½ Pressing the ENERGY SAVER button.
½ Setting a document on the fax for sending or copying.