Canon fax-l800 user’s guide english – Canon FAX-L800 User Manual

Page 229

Advertising
background image

Canon

FAX-L800 User’s Guide

ENGLISH

12-11

Chapter 12

Other Special Features

Feature

Menu Item

Description of default

Manual receiving with
extension phone

REMOTE RX

To start receiving a fax manually by answering an extension
telephone connected to the fax, dial 25. You can change this
number or set the fax to start receiving after hanging up the
handset of the extension phone. (

Q7-6, 16-12)

Memory receiving

MEMORY RX

If paper or toner runs out while you are receiving a long
document the remainder of the document will be stored in the
memory until you can re-fill the paper cassette or replace the
toner cartridge. You can also set an alarm to sound when the fax
starts receiving a document in the memory. (

Q16-13)

Offhook alarm

OFFHOOK ALARM

If the handset remains off the hook, an alarm will sound. The
volume of this alarm can be adjusted or it can be turned off.
(

Q16-9)

Pause length

MID PAUSE SET

A pause entered within a number is set for 2 seconds. You can
lengthen this pause up to 15 seconds. A pause entered at the
end of a number is fixed at 10 seconds and can not be adjusted.
(

Q4-2, 16-9)

Printing: Continue
printing with toner
supply low

TONER SUPPLY LOW

When the toner supply runs low, the fax saves the remainder of
the document into the memory. You can set the fax to continue
printing even after the toner runs low during printing. (

Q16-16)

Printing: Footer on
printed documents

RX PAGE FOOTER

The fax will not print a footer on every document received
unless you turn this feature on. (

Q16-13)

Printing: Print order

PRINT IN ORDER

The fax prints all document pages in reverse order when you
remove them from the output tray. You can set the fax to print
all document pages in the order they were sent. (

Q16-16)

PROGRAM button

PROGRAM KEY

If you press PROGRAM before you start a transmission, you
can tell the fax to print an activity report for the transmission.
This button can be programmed for other functions. (

Q12-4,

16-5)

Quick-on-line TX

QUICK ON-LINE TX

When you are scanning documents, the fax will start dialling and
sending before all pages are scanned. You can turn this feature
off. (

Q16-10)

Receiving password

RX PASSWORD

No receiving password is set until you set one. If the other party
regularly sends you documents with only an ITU-T password
with no subaddress, set the RX PASSWORD. (

Q16-26)

Redialling

AUTO REDIAL

If the other party’s line is busy, the fax is set to perform two re-
dialling attempts at two minute intervals. You can increase the
number of re-dial attempts and the length of the interval
between attempts. If an error occurs during re-dialling, the fax is
set to re-send the first page of the document and the error page.
(

Q6-16, 16-10)

Advertising