Canon FAX-L800 - Manual (Page 227)

Canon FAX-L800 User’s Guide ENGLISH
12-9 Chapter 12 Other Special Features
Turning the Stamp Feature ON/OFF
If you have turned the TX STAMP setting ON, documents will be stamped
according to the above setting. If you have not turned on the TX STAMP feature
but you still want to occasionally stamp documents you scan for sending, or if you
have turned on the TX STAMP feature but you want to turn it off occasionally,
follow the procedure below.
1. Set the document on the fax. (
Q6-3)
Set the document resolution, contrast, and document type. ( Q6-4)
You can also select a sender’s name with the TTI SELECTOR button.
(
Q6-6)
STAMP
(OPTION)
2. Open both One-touch Speed Dialling panels and press STAMP.
TX STAMP
OFF
<
< 3. If you want to stamp document pages, press the search buttons until you see
ON.
TX STAMP
ON
-or-
<
< If you want to turn the stamp feature off, press the search buttons until you
see OFF.
TX STAMP
OFF
SET 4. Press SET.
TEL=
5. Close both One-touch Speed Dialling panels and send the document.