Canon FAX-L800 - Manual (Page 146)

Canon FAX-L800 User’s Guide ENGLISH
7-16 Chapter 7 Receiving Documents
Changing the Transfer Settings
Follow this procedure to change settings in the transfer setup file.
1. Open the TRANSFER menu. ( Q7-12)
TRANSFER
1.SETUP FILE
<
< 2. Press the search buttons until you see the display below.
TRANSFER
2.CHANGE DATA
SET 3. Press SET.
CHANGE DATA
PASSWORD
If you have not set the password, you can skip the next step.
1
4
7
2
5
8
0
3
6
9
ABC
GHI
PQRS
JKL
TUV
M NO
WXYZ
DEF SET 4. Use the buttons on the numeric keypad to enter the four-digit password
protecting the transfer setup file. Then press SET.
<
< 5. Press the search buttons to display the desired setting.
CHANGE DATA
1.FILE NAME
CHANGE DATA
6.PRINT RX DOC.
SET 6. With the setting you want to change on the display, press SET.
7. To change the settings, follow the same procedures you used to set up the
transfer setup file. (
Q7-12)
To delete any settings, press CLEAR and press SET.
8. Press STOP to return to standby.