Canon FAX-L800 - Manual (Page 145)

Canon FAX-L800 User’s Guide ENGLISH
7-15 Chapter 7 Receiving Documents
Turning the Transfer Mode ON and OFF
You can use this procedure to move the fax into and out of the transfer mode if
the timer has not been set to switch the fax in and out of the transfer mode
automatically. If the timer has been set to move the fax into and out of the
transfer mode automatically, you can still use this procedure to put the fax in the
transfer mode before the timer switches the fax into the transfer mode.
Turning Transfer Mode ON
Follow this procedure to turn the transfer mode on manually at any time.
TRANSFER
1. Open both One-touch Speed Dialling panels. Then press TRANSFER.
PASSWORD
1
4
7
2
5
8
0
3
6
9
ABC
GHI
PQRS
JKL
TUV
M NO
WXYZ
DEF SET 2. If you have registered a password, use the buttons on the numeric keypad to
enter your four-digit password, then press SET.
TRANSFER
The fax is now in the transfer mode and will transfer documents to the
destinations you specified in the transfer setup file.
Turning Transfer Mode OFF
Follow this procedure to turn the transfer mode off manually at any time.
TRANSFER
TRANSFER 1. Open both One-touch Speed Dialling panels. Then press TRANSFER.
PASSWORD
1
4
7
2
5
8
0
3
6
9
ABC
GHI
PQRS
JKL
TUV
M NO
WXYZ
DEF SET 2. If you have registered a password, use the numeric keypad to enter your four-
digit password, then press SET.
26/12 ’97 FRI 08:30
The fax is now in the standby mode and is ready for normal operation.