Canon FAX-L800 - Manual (Page 41)

Canon FAX-L800 User’s Guide ENGLISH
2-27 Chapter 2 Setting Up
½ The paper level gauge on the front paper cassette tells you the level of the
current paper supply without opening the paper cassette. When you see the
paper level gauge drop, make sure you have a supply of paper on hand to fill
the cassette. When you see the SUPPLY REC. PAPER message, re-fill the
cassette.
100%
50%
0%
A4
Turning on the Power
1. Connect the power cord to the power receptacle on the rear of the fax unit.
2. Connect the other end of the power cord to the power source.
The fax must be connected to a properly grounded, three-prong 230 V AC outlet.
After you connect the power cord to the power source, the fax LCD display
will light. There is no power switch on the fax unit.
200 – 240 V AC
Power Outlet
It will take a few seconds for the unit to warm up.
PLEASE WAIT