Canon FAX-L800 - Manual (Page 296)

Canon FAX-L800 User’s Guide ENGLISH
15-26 Chapter 15 Maintenance & Frequently Asked Questions
CODE PROBLEM SOLUTION
#080 The other party’s fax does not support receiving a
document with a subaddress. Call the other party and confirm whether or not
their fax supports subaddress receiving. Try sending
again without a subaddress.
#081 The other party’s fax does not support receiving a
document with an ITU-T password. Call the other party and confirm whether or not
their fax supports ITU-T password receiving. Try
sending again without a password.
#082 The other party’s fax does not support accepting a
polling request with a subaddress. Call the other party and confirm whether or not
their fax can accept a polling request with a
subaddress. Try sending again without a subaddress.
#083 You can not poll the other party to receive a
document because a subaddress and/or password does
not match. Call the other party and confirm that the subaddress
and/or password that you are using are correct.
#084 The other party can not receive a document with an
ITU-T password. Call the other party and confirm whether or not the
other party’s fax supports receiving a polling request
with an ITU-T password. Ask the other party to try
again without an ITU-T password.
#102 You can not receive documents because a subaddress
and/or password does not match. Call the other party and confirm whether or not you
are using the correct subaddress and/or password.
#995 Documents in the memory to be sent have been
cleared. The current transmission has been cleared. You may
start again, start a new operation, or leave the fax in
standby.
List of LCD Display Messages (Alphabetic
List)
Here is a list of messages that are displayed on the screen when a problem occurs
in the fax or the printer.
MESSAGE WHAT IT MEANS
#ALREADY IN USE The box number you entered is already in use. For example, you can not use the
same box number for a confidential mailbox and a polling box. Try again with
another box number.
AUTO REDIAL The other party’s line was busy on the previous dialling attempt and your fax unit is
dialling the number again. To cancel redialling, press STOP when direct dialling or
press DELETE FILE, select transaction number then press SET when memory
sending.
BUSY/NO SIGNAL The other party did not answer, even after redialling. Wait for a few minutes and try
again. When you send documents long distance, press PAUSE after dialling. If you
still can not send the document, the other party may have turned off their fax unit.