Canon FAX-L800 - Manual (Page 216)

Canon FAX-L800 User’s Guide ENGLISH
11-18 Chapter 11 Setting Up and Using Polling
SET 3. Press SET.
SUBADDRESS
1
4
7
2
5
8
0
3
6
9
ABC
GHI
PQRS
JKL
TUV
MNO
WXYZ
DEF SET 4. If the other party’s fax supports ITU-T subaddresses and passwords, use the
buttons on the numeric keypad to enter the subaddress for the polling box.
Then press SET.
-or-
SET If the other party’s fax does not support ITU-T subaddresses and passwords,
just press SET.
5. If you want to skip selecting a sender name, go on to the next step.
-or-
TTI SELECTOR
<
<
If you want to select a sender name, press TTI SELECTOR until you see the
sender name you want to use. You can also use the search buttons to scroll up
and down the TTI list.
SENDER’S NAME
20 CANON FAX DIV.
SET 6. Press SET. The fax starts scanning the document into the polling box.
POLLING TX 6048
SCANNING DOC. P.003
When another party polls your fax to receive a document stored in your
polling box, the document is sent if the following conditions are met:
½ If you entered both a subaddress and password when you created the
polling box, the subaddress and password of the other party’s polling
request must match the subaddress and password for the polling box.
½ The password setting is optional. However, if you have registered a
password for the polling box, the other party’s polling request must
contain a matching password.
½ If no password is registered for the document in the polling box and the
other party’s polling request contains a password, then the document is
not sent.