Canon FAX-L800 - Manual (Page 90)

Canon FAX-L800 User’s Guide ENGLISH
4-26 Chapter 4 Setting Up and Using Speed Dialling
Using Speed Dialling
Follow the procedures in this section to use speed dialling. The three speed
dialling methods are One-touch Speed Dialling, Coded Speed Dialling, and
Group Dialling. If you forget where a number is registered, you can find it and
dial it with directory dialling. (
Q4-31)
Using One-touch Speed Dialling
Follow this procedure to start a transmission and send a document at the press of
a One-touch Speed Dialling button.
To use this feature, you must first register a telephone number for One-touch
Speed Dialling. (
Q4-6)
1. Set the document on the fax. ( Q6-3)
Set the document resolution, contrast, and document type. ( Q6-4)
You can also select a sender’s name with the TTI SELECTOR. (
Q6-6)
DOCUMENT READY
01
72
2. Press the One-touch Speed Dialling button where the telephone number you
want to dial is registered.
If you do not see the number of the button you want, open the first or second
One-touch Speed Dialling panel to see more buttons. After 5 seconds, the fax
starts to send the document.
TEL= 123 4567
01 CANON USA
TRANSMIT 0025
SCANNING DOC. P.001
You will see a series of brief, alternating messages that tell you the fax is
dialling, calling, then transmitting the document. The number being dialled,
name of the other party, and the transaction number of the document are also
displayed.