Canon FAX-L800 User Manual
Page 328
Canon
FAX-L800 User’s Guide
ENGLISH
16-20
Chapter 16
Summary of Important Settings
8.POLLING TX
For the memory box, turn polling sending on and off.
NO
Memory box can not be used as a polling box.
YES
Memory box can be used as a polling box.
1.ERASE AFTER TX
Set how the document in the memory box is to be handled
after being polled and sent.
ON
Document is erased after polling/sending.
OFF
Document remains in the memory box after polling/sending.
2.TX DOCUMENT
Transmit documents received in the memory box or scanned
into the memory box for polling and receiving.
1.RECEIVED DOCUMENT
Set documents received in the memory box for sending after
polling.
TRANSMIT
Documents received in the memory box from other faxes can
be transmitted.
NOT TRANSMIT
Documents received in the memory box from other faxes can
not be transmitted.
2.SCAN DOCUMENT
Set documents scanned into the memory box for sending after
polling.
TRANSMIT
Documents scanned into the memory box can be transmitted.
NOT TRANSMIT
Documents scanned into the memory box can not be
transmitted.
2.CHANGE DATA
Change settings for the memory box or add settings you did not
do when you created the memory box.
SET BOX #
Enter the number of the box you want to change.
PASSWORD
Enter the password protecting the memory box settings.
You can now change any of the settings listed in the table above.
3.DELETE FILE
Delete the general memory box.
SET BOX #
Enter the box number of the memory box you want to delete.
PASSWORD
Enter the password protecting the memory box that you want to
delete.
4.PRESET POLLING
Set up preset polling/receiving setting. (
Q11-5)
1.SETUP FILE
Set up a setting to poll at preset time.
SET BOX #
Create a two-digit preset polling box.
1.FILE NAME
Enter the name of the file (24 characters).
2.PASSWORD
Enter a four-digit password to protect the polling settings.
3.SELECT LOCATIONS
TEL=
Select the numbers of the fax units you want to poll. Use the
One-touch or Coded Speed Dialling buttons to enter the
numbers of the fax machine that you want to poll.
4.START TIME
Set the time(s) that you want to start polling.
EVERY DAY
Set up to 5 times for every day.
SELECT DAYS
Set up to 5 times for each day selected.