Welch Allyn SureTemp PlusModule - User Manual - Manual (Page 78)

SureTemp Plus PC Display SureTemp Plus Module OEM Implementation
78 Confidential Welch Allyn OEM Technologies
SureTemp Plus PC Display
Figure 12. Handheld Window
The Handheld window closely emulates a Welch Allyn
SureTemp Plus Thermistor Thermometer.
The Handheld view is intended to be a suggestion or
recommendation as to how one should present the
temperature measurement, status, and advisory
messages when implementing the OEM module into a
new system.
Operation
For information on operating the Handheld, refer to
“SureTemp PLUS Handheld” in the SureTemp Plus PC
Help files.
1. Pull the probe from the probe well and verify
that all segments are shown on the simulated
LCD display.
2. Verify that the oral mode is selected (the
flashing head icon on the handheld display). If
this icon is not present, click the Mode
Selection button until the flashing head icon
appears.
3. Load a probe cover by inserting the probe into
a probe cover and pressing the probe handle
down firmly. The probe handle moves slightly to
engage the probe cover.
4. With the Oral Mode indicator displayed, quickly
place the probe tip under the patient’s tongue on either side of the mouth to reach the
rear sublingual pocket (Figure 13). Have the patient close his/her lips around the probe.
Figure 13. Location of the Rear Sublingual Pockets
rear sublingual pockets
(under the tongue)