CANOGA PERKINS 9175 Command Reference - Manual (Page 161)

CanogaOS Command Reference
10-4
ethernet cfm mep level LEVEL (down|up) mpid MEPID vlan VLANID
no ethernet cfm mep level LEVEL (down|up) mpid MEPID vlan VLANID
Command Mode
Interface mode
Default
None
Usage
This command is used to Create a local MEP.
Examples
Related Commands
ethernet cfm domain DOMAIN_NAME level LEVE
service CSI_ID vlan VLAN_ID
10.6 Configuring a remote Maintenance End Point
Use this command to define a remote maintenance end point (MEP) within a maintenance domain,and
enable to crosscheck the RMEP.
Command Syntax
mep crosscheck mpid MEPID vlan VLANID (|mac MAC)
no mep crosscheck mpid MEPID vlan VLANID (|mac MAC)
Command Mode
Configure mode
Default
The default value of bridge maximum age is 20 seconds.
Usage
This command is used to Create a local MEP.
Examples
Switch#configure terminal